![]() ![]() ![]() Installing GSAS-II on 32-bit Raspberry Pi OS 2A. These instructions provide for more details on the self-installer.Ģ. You can have multiple GSAS-II installations in separate directories if desired. This can be changed in all of the above at your convenience. Note that ~/g2full above specifies where GSAS-II and its Python installation will be placed. ~/g2full/bin/python ~/g2full/GSASII/GSASII.py The above will create a desktop shortcut and a command in the desktop manager's "Other" menu (click on the Raspberry icon in the upper left corner), but it is also possible to start GSAS-II with either this command: To allow GSAS-II to be updated from the program and to save config options, they should be run from the same account where GSAS-II will be run, which ideally should be a "user" rather than an "admin" account, such as what was used in the previous step.īash /tmp/gsas2full-Latest.sh -b -p ~/g2full These commands do not require sudo access. Then use the following commands to download and install Python and GSAS-II with a conda-forge based installer. Sudo apt install subversion lxterminal wget GSAS-II needs the subversion and lxterminal packages and we will use the wget command. These are all optional, but are recommended: The advantage of this is that the can be downloaded once and broadcast to many computers, saving internet bandwidth or even for computers that are not on the net, but the second installation method should work (perhaps with minor modifications) on all Pi OS versions and might be simpler.Īfter the computer is first booted, a few commands are worthwhile to update the OS. This provides instructions for using a provided installation kit built specifically for OS 64-bit Raspberry Pi OS Bullseye. Installing GSAS-II on 64-bit Raspberry Pi OS On all other machines, one should use 32-bit Bullseye, although the previous version (Buster, based on Debian 9) can also be used.ġ. The ideal OS version to install is the 64-bit version of the current Raspberry Pi OS, tagged as Bullseye, (based on Debian 10), but this runs only on the following Pi models: 3B, 3B+, 3A+, 4, 400, CM3, CM3+, CM4, Zero 2W OS download from here. (The Pi Zero 2W is a much better choice, however). GSAS-II can be run on 32-bit and 64-bit Raspberry Pi systems running the two most recent versions of the Raspberry Pi OS (formerly called Raspbian) and pretty much any of the models, though the Pi Zero with only 0.5 Gb of memory is probably a bit small and slow for larger refinements OTOH it does cost only $5. Installing GSAS-II on Raspberry Pi (Linux) systems ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |